FlexConnect can be simple once you follow the a clear workflow.
This article breaks down that process and gets you rolling with your first SSID online.
1. Sets AP regulatory domain
ap profile default-ap-profilecountry US!2. Create the users vlan on the APs
vlan 30name VL30-USERs!3. Flex connect profile creation
wireless profile flex lab-flex-profilenative-vlan-id 150vlan-name VL30-USERsvlan-id 30!4.Policy Profile
wireless profile policy lab-USER-policy-profileno central dhcpno central switchingvlan VL30-USERsno shutdown!5. Site tag
wireless tag site LAB flex-profile lab-flex-profile no local-site!6. WLAN Definition
wlan Flexconnect01 1 Flexconnect01 security wpa psk set-key ascii 0 Test12345 no security wpa akm dot1x security wpa akm psk no shutdown!7. Policy Tag
wireless tag policy lab-USER-Policy-tag wlan Flexconnect01 policy lab-USER-policy-profile!8. AP Location & Tagging
ap location name LAB tag policy lab-USER-Policy-tag tag site LAB!9. AP Tag Assignment
I usually perform these steps in the GUI since it ties everything together, but you can also mass‑deploy them through the CLI.”
ap 00b7.XXXX.XXXX policy-tag lab-USER-Policy-tag site-tag LAB
Leave a Reply